|
Quick-Nuts incorporate an adjustable set screw
that stops the Quick-Nut at the desired
position. The first time you install the
Quick-Nut, you must adjust it in the
normal trial and error manner. After the
desired quick release clamping force is
achieved, you then use the Allen Key provided,
and tighten the set screw until it stops. The
next time you install your wheel, just turn
the Quick-Nut until it stops, then close the
quick release lever. The correct
clamping force is achieved over and over
again. There is no more guesswork when
mounting your wheels. Quick-Nuts are
safer and faster to use and there is no
chance to incorrectly mount your wheels.
Quick-Nuts are for everyone, not just racers. |