|
 |
| In
this corner weighing in at 16 pounds in blue
and silver is the 1up
CPR A-2000 Trainer. |
In
this corner weighing in at 19 pounds in black
and silver is the CycleOps Fluid2 Trainer. |
|
The
1up CPR A-2000
Trainer is constructed from
anodized aluminum, and has no welds.
|
The
CycleOps Fluid2 Trainer is constructed
from steel, with welds, and is painted black. |
| The
1up CPR A-2000
Trainer uses the latest patented Centrifugal
Pressure Resistance system technology (CPR)
with a resistance range from 4 to 3000 watts.
No oil to leak out
|
The
CycleOps Fluid2 Trainer uses a fluid
resistance system with a resistance range from
20 to 1500 watts. WARNING: Fluid trainers can leak oil.
|
| The
1up CPR A-2000
Trainer has a 3" diameter
roller for
the quietest ride of any trainer. Large rollers
are quiet with little tire wear. |
The
CycleOps Fluid2 Trainer has a 2"
diameter roller. Smaller rollers cause more tire
wear, and create more noise. |
|
The
1up CPR A-2000
Trainer has 6.5 pounds of rotating
weight, most of any trainer. The flywheel is 6
inches in diameter.
|
The
CycleOps Fluid2 Trainer has 3 pounds of
rotating weight. The flywheel is 5 inches in
diameter. |
|
The
1up CPR A-2000
Trainer has the smoothest ride of
any trainer, with the longest coast-down of
any trainer.
|
The
CycleOps Fluid2 Trainer has only 3 seconds of coast-down. This short coast-down
creates a uneven ride. |
| The
1up CPR A-2000
Trainer has a foot operated quick
release for hands free operation, with a
compact folding handle. |
The
CycleOps Fluid2 Trainer has a hand
operated quick release that does not fold. You
have only one hand to hold your bike up. |
|
The
1up CPR A-2000
Trainer has 14 different vertical
positions to chose from and will accommodate
16 to 29" wheels.
|
The
CycleOps Fluid2 Trainer has no vertical
adjustment, and can only be used with large
wheels (26" and 700C). |
| The
1up CPR A-2000
Trainer has telescoping front legs
with 3.1 inches of travel. This allows the
user to raze or lower the rear wheel so it is close to the floor for
level training. The Front legs lock into
place to prevent accidental collapse. To
fold the Front Legs just push the
spring-loaded release button. |
The
CycleOps Fluid2 Trainer does not have
this important feature. A riser block under
the front wheel must be used for level
training. Riser blocks must be purchased,
around $16. The Front legs do not lock
into place and can accidentally collapse. |
| The
1up CPR A-2000
Trainer comes fully assembled and
ready to use. |
The
CycleOps Fluid2 Trainer must be
assembled, (tools required). |
| The
1up CPR A-2000
Trainer folds down to only 6 inches
thick for compact storage. The trainer will fit
back into its own box. |
The
CycleOps Fluid2 Trainer when folded is
12 inches thick. You can toss the box it came
in, you now need a much bigger box. |
| The
1up CPR A-2000
Trainer is proudly designed,
manufactured and assembled in the U.S.A. 100% |
The
CycleOps Fluid2 Trainer is
made in China. |
| The
1up CPR A-2000
Trainer are built tough and
guaranteed for life. If anything breaks or
wears out, we will replace it for free...for
life! |
The
CycleOps Fluid2 Trainer has a limited
warranty that applies to the original owner
only. Worn parts are not covered. |