|
Trainers Rollers Trainer Accessories Bike Racks Q-R Skewer Nut Reviews Services |
|
1up USA Aluminum Quik-Rack Installation to Vehicle |
|
How the Quik-Rack mounts to both 1-1/4 & 2 inch receivers
The 2 inch adapter increases the hitch bar size to 2 inch. When the adapter is not used the hitch bar is for a 1-1/4 inch receiver. The adapter is held in place with an Allen bolt and the tool is included. Installing the adapter takes only ten seconds. Switching from 1-1/4 to 2 inch is quick easy. The Quik-Rack has a Anti-Theft system included with every rack. Unless you have the Anti-Theft Tool you can't remove the rack from the vehicle. We are so confident that our security system will prevent rack theft that if your Quik-Rack is stolen off your vehicle we will replace it for FREE! The Quik-Rack is held in the receiver by an expender ball in the corner of the 1-1/4 hitch bar. When the Anti-Theft bolt is tightened it forces the ball out and to the top left corner of the receiver. The ball pushes the hitch bar to the bottom right corner of the receiver. This eliminates all wobble and play. Because there is no hitch pin or bolt to install you can push the hitch bar all the way into receiver. This allows for more ground clearance and is very compact on the vehicle. Hitch bars are held in by pins or bolts. Towing a boat or trailer requires allot of pulling-out strength. Because bike racks don't tow anything they require very little pull-out strength. Without a pin or bolt to install mounting the Quik-Rack takes only 10 seconds. The Quik-Rack is very secure and tight on the vehicle.
Installing the 1up USA Quik-Rack to your vehicle STEP1: Just unfold the 2 piece tray.
STEP 2: Insert the Quik-Rack into your vehicles hitch receiver, then tighten the Anti-Theft expander bolt. The Gold Anti-Theft tool is included with the Quik-Rack. Mounting time is only 10 seconds! You are now ready to load your bikes. There is no hole under your vehicle to locate, and no bolt or pin to install.
The Quik-Rack comes with 2 Anti-Theft Tools 1up USA Quik-Rack comes fully assembled in it's reusable box The 1up USA Quik-Rack and Quik-Rack Add-On comes fully assembled and ready to mount to your vehicle. The reusable self locking box it comes in is only 30" X 14" X 8" a very small box! You can store the Quik-Rack in the trunk of your vehicle. Other racks come unassembled and require time and effort to assemble. They will not fit back in their boxes so you end up with a 6 foot or longer rack to store. Bike racks on vehicles get very dirty, it's nice to put them in a box for handling.
|
|
1up USA LLC |
|
email:
email@1upusa.com |